Guide
Texturising scissors: what they do and when you need one
A texturising scissor is usually added to a kit after the cutting scissor, and it isn't always clear when that moment has arrived. This guide explains what a texturising scissor is, what it does in the hair, and how to tell whether you need one yet. It's written for apprentices and newer stylists, so every term gets explained along the way.
On this page
What a texturising scissor is
A texturising scissor is a scissor with teeth. One blade (sometimes both) has a row of notches cut into it, so when the blades close, only the hair caught between the teeth is cut. The rest slips through the gaps. Instead of a straight line, you get a scattered, broken edge and less weight in the section.
You'll hear texturising scissors, thinning scissors, thinners, texturisers and chunkers used for overlapping tools. The names aren't always used the same way from salon to salon. So go by the job the maker names: blending and softening, or bulk and visible texture. Tooth count is not cut rate, so read the maker's own figure where there is one.
Worth knowing: on our site, sets pair a cutting scissor with a thinning scissor. The Ichiro Ergo set, for example, comes with a 6.0 inch thinning scissor that has 30 teeth. Each model page lists what's in the box.
What it does that your cutting scissor can’t
- Softens a hard line. A blunt cut can look heavy at the ends. A few closes with a texturising scissor breaks up that line so it moves.
- Takes weight out without losing length. Thick hair can sit wide or puff out. Removing some bulk from inside the section lets it sit closer without going shorter.
- Adds movement and piecey texture. On short, layered styles it separates the ends so they can be styled.
- Blends. Where two lengths meet, it softens the step between them.
A cutting scissor can do some of this with point cutting or slide cutting. A texturising scissor does it faster and more evenly, which helps when you're still building that hand control.
Do you need one yet?
If you're only buying one scissor this year, buy the cutting scissor. You'll use it on almost every client; a texturising scissor comes out on some clients, not all.
You probably need one when you notice yourself doing any of these regularly:
- point cutting into thick hair for a long time to take out weight;
- softening the ends of blunt cuts on most clients;
- working on short, textured styles where the ends need breaking up;
- borrowing a colleague's texturiser more than once a week.
If none of those sound like your week, wait. Buying a texturising scissor before you know what kind of weight removal you do often means buying the wrong tooth pattern.
Set or separate?
A set gives you a cutting scissor and a thinning scissor in the same finish, so they look like a pair in your case. It's a good choice when you need both at once, for example when you're replacing your training kit. If you already own a cutting scissor you're happy with, buying a texturiser on its own lets you choose it purely for the job.
In the sets on our list, the thinning scissor is 6.0 inches and you pick the length of the cutting scissor. That's a common pairing, because a 6.0 inch thinner covers enough hair for most sections while staying easy to control.
Using one gently in your first months
Texturising scissors forgive less than they look. Hair you've removed can't be put back, and a close in the wrong place can leave a hole or a short, spiky piece. A few habits help:
- Start away from the scalp. Work in the mid-lengths and ends first. Cutting close to the root removes short hairs that can stick up as they grow.
- Take one close, then look. Comb the section down and check before you go again. It's easy to remove more and impossible to put it back.
- Keep the blades moving. Opening and closing in the same spot cuts a visible line. Slide or angle the scissor between closes so the texture spreads out.
- Go lighter on fine hair. Fine, thin hair needs very little taken out. Save heavier work for thick, dense hair.
- Hold it like your cutting scissor. Ring finger in the finger ring, the tip of your thumb in the thumb ring, little finger on the rest.
Common mistakes in the first year
- Using it to fix a cut that needed a cutting scissor. If the shape is wrong, texture won't hide it. Fix the line first.
- Texturising every client the same way. Fine hair, thick hair and curly hair all respond differently. Look at the hair before you reach for the tool.
- Working too close to the root on short hair. Short pieces can stand up as they grow. Stay in the mid-lengths and ends until you're confident.
- Closing the blades fully at speed. Slow, controlled closes give you time to see what's happening.
Looking after it
Teeth trap hair and product, so wipe the blades between clients and brush out the teeth at the end of the day. Oil the pivot as you would your cutting scissor. A texturising scissor needs sharpening less often than a cutting scissor, but when it starts to snag or pull, send it to a sharpener who handles toothed blades.
Next steps
Browse the sets on our model pages to see which cutting and thinning pairs we list, or read the choosing guide if you're still working out your cutting scissor first. Not sure which way to go? Ask us and tell us the kind of hair you cut most.